Fable3mod
Discussions for modifying Fable 3
Home » Modding Forums » Formats » Question about the MDL format
Question about the MDL format Tue, 10 September 2013 09:28 Go to next message
asmcint is currently offline  asmcint
Messages: 48
Registered: September 2013
Location: U.S.A.
Member
Are the MDL files for Fable III related in any way aside from the file extension to the Autodesk MDL format?

To whomever designed the map of Mistpeak Valley to look so much more simple than the actual level is: May the Archangel Michael descend from the heavens and plant his boot squarely between your legs for your asshattery.

Report message to a moderator

Re: Question about the MDL format Tue, 10 September 2013 09:59 Go to previous messageGo to next message
Keshire is currently offline  Keshire
Messages: 137
Registered: August 2013
Senior Member
Superficially. I wrote a blender script to import static models into blender that I still need to upload. But I was having problems with the math to figure out bone rotations to grab animated models.

Report message to a moderator

Re: Question about the MDL format Tue, 10 September 2013 10:22 Go to previous messageGo to next message
asmcint is currently offline  asmcint
Messages: 48
Registered: September 2013
Location: U.S.A.
Member
But, were I to use that script, would I be able to import a normal Autodesk MDL as well as a Fable III MDL?

To whomever designed the map of Mistpeak Valley to look so much more simple than the actual level is: May the Archangel Michael descend from the heavens and plant his boot squarely between your legs for your asshattery.

Report message to a moderator

Re: Question about the MDL format Tue, 10 September 2013 13:48 Go to previous messageGo to next message
Keshire is currently offline  Keshire
Messages: 137
Registered: August 2013
Senior Member
asmcint wrote on Tue, 10 September 2013 10:22
But, were I to use that script, would I be able to import a normal Autodesk MDL as well as a Fable III MDL?


Nope. There's enough differences that that would not be possible.

Report message to a moderator

Re: Question about the MDL format Tue, 10 September 2013 14:13 Go to previous messageGo to next message
asmcint is currently offline  asmcint
Messages: 48
Registered: September 2013
Location: U.S.A.
Member
Damn. That sucks, I was kinda hoping I could use your work with that plugin to make an Autodesk plugin for Blender. Oh well, I can still take a crack at making an export plugin once you've uploaded your work.

To whomever designed the map of Mistpeak Valley to look so much more simple than the actual level is: May the Archangel Michael descend from the heavens and plant his boot squarely between your legs for your asshattery.

Report message to a moderator

Re: Question about the MDL format Tue, 10 September 2013 22:54 Go to previous messageGo to next message
Artofeel is currently offline  Artofeel
Messages: 195
Registered: August 2013
Location: Russia
Senior Member
maybe this is DotXSI format?
Quote:
art\characters\fable 3 characters\children\dotxsi\au_fchild_hat_01\au_fchild_hat_01.mdl

somebody tried to add a header?

Report message to a moderator

Re: Question about the MDL format Tue, 10 September 2013 23:02 Go to previous messageGo to next message
asmcint is currently offline  asmcint
Messages: 48
Registered: September 2013
Location: U.S.A.
Member
If it's a DotXSI format, then this SHOULD help in being able to import and export the models.

Link to code from an XSI import/export plugin, hopefully works.

To whomever designed the map of Mistpeak Valley to look so much more simple than the actual level is: May the Archangel Michael descend from the heavens and plant his boot squarely between your legs for your asshattery.

Report message to a moderator

Re: Question about the MDL format Sat, 02 November 2013 11:14 Go to previous messageGo to next message
Keshire is currently offline  Keshire
Messages: 137
Registered: August 2013
Senior Member
asmcint wrote on Tue, 10 September 2013 23:02
If it's a DotXSI format, then this SHOULD help in being able to import and export the models.

Link to code from an XSI import/export plugin, hopefully works.


XSI itself is plain text ascii. They used their own in-house plugin to export from dotxsi to their binary model format. .MDL is pretty much just a generic extension for models. Kind of like how .bsp is the generic format for quake/unreal levels.

Once I figure out what the unknowns do, and which data is used and not used, I can write an exporter for blender to get models back into Fable 3. There's really only a few things left that I need to make that possible.

The bulk of my work right now consists of figuring out what the second Verts[nVerts][8] stucture does. And then I still need to check if Unknown2 is used. If it is, I need to figure out what it's doing.

After that, it's material/texture stuff. But that should be vastly easier to deal with.

[Updated on: Fri, 22 November 2013 06:53]

Report message to a moderator

Re: Question about the MDL format Sat, 02 November 2013 17:49 Go to previous messageGo to next message
asmcint is currently offline  asmcint
Messages: 48
Registered: September 2013
Location: U.S.A.
Member
That bit having to do with illumination might be glow strength. v1/2/3 is probably handled by the game's quality settings so that it knows what texture resolution to use for given settings.

To whomever designed the map of Mistpeak Valley to look so much more simple than the actual level is: May the Archangel Michael descend from the heavens and plant his boot squarely between your legs for your asshattery.

Report message to a moderator

Re: Question about the MDL format Sat, 02 November 2013 18:59 Go to previous messageGo to next message
Keshire is currently offline  Keshire
Messages: 137
Registered: August 2013
Senior Member
asmcint wrote on Sat, 02 November 2013 17:49
That bit having to do with illumination might be glow strength. v1/2/3 is probably handled by the game's quality settings so that it knows what texture resolution to use for given settings.


Nah, there's a texture that controls that. 
Material28
DiffuseMap art\inventory\multimeshweapons\pictures\hammer_head_auroran_medium\hammer_head_auroran_medium_diff.tex
SpecularMap art\inventory\multimeshweapons\pictures\hammer_head_auroran_medium\hammer_head_auroran_medium_spec.tex
NomralMap art\inventory\multimeshweapons\pictures\hammer_head_auroran_medium\hammer_head_auroran_medium_norm.tex
EnvironmentMap art\inventory\multimeshweapons\pictures\_sharedtextures\rifle_barrel_base_env.tex
IlluminationMap art\inventory\multimeshweapons\pictures\hammer_head_auroran_medium\hammer_head_auroran_medium_illum.tex



I this has more to do with self lit mesh. So that it doesn't need a lightsource to see the texture. At least from what I saw. I've had a ton of problems testing changes so I'm not too sure.

Interestingly enough, Fable 3 will completely skip over files it doesn't like and use the retail/earlier DLC version instead. It's caused me quite a few headaches today.

The second array is 8 floats. And it's per vertex, so I doubt it's doing anything quality wise (I think the steaming.bnk handles that with .gmd).
My best guess is that normals and possibly smoothing groups are being stored there. Since Blender can't import normals I'll have to write the exporter and just guess which ones they are until I get it right...

Report message to a moderator

Re: Question about the MDL format Sun, 03 November 2013 20:51 Go to previous message
Keshire is currently offline  Keshire
Messages: 137
Registered: August 2013
Senior Member
Keshire wrote on Sat, 02 November 2013 11:14

And then I still need to check if Unknown2 is used. If it is, I need to figure out what it's doing.


I still have some checking to do, but it looks like that unknown is total verts used for faces. I found a couple easy ones that made it obvious. 3 verts per face = unknown2.
	
 00000396 uint32 nTris	 2	 02000000	 4	
 00000400 uint32 Unknown2	 6	 06000000	 4	
 00000404 uint32 nVerts	 4	 04000000	 4


 00000601 uint16 Tris[nTris][3]	 	 	 12		


 00000379 uint32 nTris	 80	 50000000	 4	
 00000383 uint32 Unknown2	 240	 F0000000	 4	
 00000387 uint32 nVerts	 90	 5A000000	 4	

 00005071 uint16 Tris[nTris][3]	 	 	 480

Report message to a moderator

Previous Topic: TEX
Next Topic: BIN
Goto Forum:
  

[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Nov 23 04:19:30 PST 2024

Total time taken to generate the page: 0.01689 seconds
.:: Contact :: Home ::.

Powered by: FUDforum 3.0.9.
Copyright ©2001-2018 FUDforum Bulletin Board Software